Publications

JOURNALS

(1)R.E. Aune, S. Sridhar and Du Sichen, "A galvanic cell study of (nickel+tungsten+oxygen) in the temperature range 1034K to 1317K", J. Chem. Thermodynamics, 1994, 26, pp.493-505.

(2) S. Sridhar et al., "Investigation of the kinetics of reduction of nickel tungstate by hydrogen", Metal. & Mater. Transactions B, 1994, 25B, pp.391-396.

(3) S. Sridhar et al., "Investigation of the kinetics of reduction of nickel oxide and nickel aluminate by hydrogen", Z. Metallkd.,1994, 85 (9) pp.615-620.

(4) S. Sridhar and K.C. Russell, "Nucleation mechanisms for bubbles in materials with controlled porosity", J. Mater. Synthesis and Processing,1995, 3 (4) pp.215-221.

(5) S. Sridhar and U.B. Pal, "Effect of slurry properties on anode cermets for solid oxide fuel cells", Powder Technology, 1996, 88, pp.173-178.

(6) S. Sridhar, V. Stancovski and U.B. Pal, "Transient and Permanent Effects of Direct Current on Oxygen Transfer Across YSZ-Electrode Interfaces:", J. Electrochem. Soc, 1997, 144, pp. 2479-2485.

(7) S. Sridhar, V. Stancovski and U.B. Pal, "Effect of Oxygen-Conaining Species on the Impedance of the Pt/YSZ Interface", Solid State Ionics, 1997, 100/1-2, p.17-21

(8) V. Stancovski, S. Sridhar and U.B. Pal, "Two parallel paths for oxygen and charge transfer", J. Electroceramics, 1999, 3 (3), pp. 1-21

(9) K.C. Chou, S. Sridhar and U.B. Pal, "Activity and Ternary Phase Diagrams", Calphad, 1997, 21 (4), pp. 483-495.

(10) S. Sridhar, A.E. Giannakopoulos, S. Suresh and U. Ramamurty, "Electrical Response during Indentation of Piezoelectric Materials: A New Method for Material Characterization", J. Appl. Phys., 1998, 85 (01), pp. 1-8

(11) C. Orrling, Y. Fang, N. Phinichka, S. Sridhar, and A.W. Cramb: JOM-e, 1999 51, (7)

(12) U.Ramamurthy, S.Sridhar, A.E. Giannakopulos, S.Suresh, "Spherical Indentation of Piezoelectric Materials: Mechanical Measurements", Acta Mat., 1999, 47 (8), pp. 2417-2430

(13) R. Atwood, S. Sridhar and P.D.Lee, "Rate equations for nucleation of hydrogen gas pores during solidification of aluminium-7%-silicon alloy", Scripta Mat., 1999, 41 (12), pp. 1255-1259.
(14) K.C. Mills and S.Sridhar, "Viscosities of Iron and Steelmaking Slags", Iron and Steelmaking, 2000, 26(4), pp. 262-268

(15) R. Atwood, S. Sridhar, W. Zhang and P. D. Lee, "Diffusion Controlled Growth of Hydrogen Pores in Al-Si Castings : In situ observations and Modeling", Acta Mat., 2000, 48 (2), pp. 405-417

(16) S. Seetharaman, S. Sridhar, Du Sichen and K.C. Mills, "On the association of high temperature ionic melts", Metal. and Mater. Trans. B, 2000, 31B, pp. 111-119

(17) S. Sridhar, K.C. Chou and U.B. Pal, "Ternary Equilibria in Ternary Systems", Calphad,1999, 23 (2), pp. 165-172

(18) S. Sridhar and A.W. Cramb, "Kinetics of Al2O3 dissolution in CaO-MgO-SiO2-Al2O3 slags: In situ observations and analysis ", Accepted for publication in Metal. and Mater. Trans. B

(19) S. Sridhar and K.C. Mills, "Break Temperatures of Mould Fluxes and their Relevance to Continuous Casting", Accepted for publication in Iron and Steelmaking

(20) S. Sridhar, A.E. Giannakopulos and S. Suresh, "Mechanical and Electrical Responses of Piezoelectric Solids due to Cone Indentation", Accepted for publication J. Appl. Phys.

(21) P. Misra, V. Chevrier, S. Sridhar and A.W. Cramb, "Separation of inclusions across metal/slag interfaces", ", Accepted for publication Metal and Mater. Trans. B

(22) N. Wiswanathan, S. Sridhar, Du Sichen and K.C. Mills, "Mahematical model of chemical and thermal distribution in the top flux bed in a continuous caster", Submitted to Steel Research

CONFERENCE PROCEEDINGS

(23) S. Sridhar and K.T. Jacob, "A new matched thermochemical diagram for vacuum refining of nickel and cupronickel alloys", Proceedings of the Paul E. Queneau International Symposium (1993) Edited by R.G. Reddy and R.N. Weizenbach, pp. 41-58.

(24) R.E. Aune, S. Sridhar and Du Sichen, "Thermodynamic Study of the Ni-W-O system in the temperature range 1073-1273 K", Proceedings of the EPD Congress (1994) Edited by G.W. Warren, pp. 815-829.

(25) S. Sridhar and K.C. Russell, "Optimization of alloy chemistry for porous materials", Proceedings of the International Conference on Advances in Physical Metallurgy (1994) ICPM-94 Bombay, India.

(26) S. Sridhar, Y. Zheng and K.C. Russell, "Thermodynamics of solidification of controlled porosity alloys", Proceedings of the Applications of Thermodynamics in the Synthesis and Processing of Materials (1995) Edited by P. Nash and B. Sundman, pp. 259-269.

(27) Y. Zheng, S. Sridhar and K.C. Russell, "Controlled porosity alloys through solidification processing: A modeling study", Materials Research Symposium Proceedings (1995) Vol. 371, pp. 365-370.

(28) S. Sridhar, K.C. Chou and U.B. Pal, "Evaluation of the thermodynamics and kinetics of catalytic steam reforming over SOFC anode materials", Proceedings of the Fourth International Solid Oxide Fuel Cells Symposium (1995) Edited by: M.Dokiya, O.Yamamoto, H.Tagawa and S.C.Singhal.

(29) S. Sridhar and U.B. Pal, "Evaluation of the thermodynamics and kinetics of catalytic steam reforming over SOFC anode materials", Proceedings of the 1995 EPRI/GRI Fuel Cell Workshop.

(30) S. Sridhar, V. Stancovski and U.B. Pal,"Electrocatalytic effects of ionic, electronic and mixed conducting phases on internal steam reforming in SOFC anodes, Proceedings of the 1996 EPRI/GRI Fuel Cell Workshop.

(31) S. Sridhar, V. Stancovski and U.B. Pal, "Effect of direct current on oxygen transfer across YSZ-Pt interfaces", Proceedings of the Fifth International Solid Oxide Fuel Cell Symposium (1997) Edited by: U. Stimming, S.C. Singhal, H. Tagawa and W. Lehnert.

(32) S. Sridhar, K.C. Mills, V. Ludlow and T. Mallaband, "A comparison of mould powders used to cast slabs, billets and blooms", Proceedings of the 3rd Europeen Conference on Continuous Casting (1998)

(33) K.C. Mills and S.Sridhar, "Interfacial effects on the separation of phases in metallurgical processing", Proceedings of the Engineering Foundation conference on Metal Separation Technologies Beyond 2000, Honolulu, Hawaii (1999)

(34) X.Xu, R. Atwood, S. Sridhar, P.D. Lee and M. Mclean, "A comparison between micro-modelling approaches" Proceedings of the Symposium on Liquid Metal Processing and Casting, Santa Fe, NM (1999)

(35) S. Seetharaman, S. Sridhar, Du Sichen and K. C. Mills, "Correlation between viscosities and thermodynamics of molten slags", Proceedings of the international symposium on thermophysical properties, Singapore (1999)

(36) S. Sridhar, A.E. Giannakopoulos, S. Suresh and U. Ramamurty,"Indentation of piezoelectric ceramics: experiments, analysis and applications", MRS proccedings of Smart Maerials, Boston, MA (1999)

(37) K.C. Mills and S. Sridhar, "Interfacial effects in iron and steelmaking", Proceedings of the Belton Memorial Symposium, ISS, Sydney, AU, (2000)

(38) C. Tse, S.H. Lee, S. Sridhar and A.W. Cramb, "In-situ observations of clean steel phenomenon", Proceedings of 83rd Steel Making Conference, ISS, Pittsburgh, (2000)

(39) C.F. Orrling, S.Sridhar and A.W. Cramb, "In situ observations of crystallization phenomenon and thermal analysis in mold slags", to appear in the Proceedings on the 6th International Conference on Molten Slags, Fluxes and Salts, Stockholm, Sweden, (2000)

(40) C.F. Orrling, S.Sridhar and A.W. Cramb, "In situ observations of innoulation and crystallization in synthetic slags", to appear in the Proceedings on the 6th International Conference on Molten Slags, Fluxes and Salts, Stockholm, Sweden, (2000)

(41) S.H. Lee, C.Tse, P.Misra, V. Chevrier, C.F. Orrling, S.Sridhar and A.W. Cramb, "Separation and dissolution of alumina inclusions at slag/metal interfaces", to appear in the Proceedings on the 6th International Conference on Molten Slags, Fluxes and Salts, Stockholm, Sweden, (2000)